"Extreme Temperature Nanocrystalline Inductor Design and Demonstration for Medium Frequency Applications", ", IEEE, Veda Duppalli, Kevin Byerly, Brett Riale, Samuel Kernion, Tyler Paplham, Alex Leary, Baljit Riar, Jeffrey Ewanchuk, Lauren Wewer, Vladimir Keylin, Suman Dwari, Paul Ohodnicki, Yuankang Wang, Ronald Noebe, 2026.

“Automated characterization and loss modeling of medium frequency magnetic cores”, IEEE Applied Power Electronics Conference and Exposition (APEC), Joaquin E Tristan, Jacob A Ferrer, Christopher S Bracken, Todd J Marzec, Brandon M Grainger, and Paul R Ohodnicki, 2026.

"Spatially gradient properties in high-frequency ferrites via single-mode microwave processing", Advanced Engineering Materials, Dipika Mandal, David Greve, Lauren Wewer, Christopher Bracken, Paul Ohodnicki, 2025.

"Extreme Temperature Permeability Engineered Soft Magnetics", IEEE, Tyler Paplham, Alex Leary, Paul Ohodnicki, 2025.

"Extreme temperature stability of induced magnetic anisotropies in co-rich soft magnetic nanocrystalline ribbon", JMMM, Tyler Paplham, Yuankang Wang, Alex Leary, Paul Ohodnicki, 2025.

"Novel soft magnetic metal-ferrite nanostructured ceramic matrix composites (NCMCs) with enhanced saturation magnetization", Journal of alloys and compounds, Suraj Mullurkara, Susheng Tan, Chris Bracken, Lauren Wewer, Dipika Mandal, Paul Ohodnicki, 2025.

“Multi-objective optimization of a toroidal inductor considering parasitic capacitance”, IEEE 26th Workshop on Control and Modeling for Power Electronics (COMPEL), Todd J Marzec, Yang-Duan Su, Brandon Grainger, and Paul R Ohodnicki, 2025.

“High-Temperature Stability of Co-Based Amorphous/Nanocomposite Alloys in Terms of Oxidation and Secondary Crystallization Behavior”, Journal of Alloys and Compounds, Wang, Yuankang, 2025.

"High frequency toroidal inductor design for high power applications using multi-objective optimization considering ac winding losses and parasitics", Master’s thesis, University of Pittsburgh, Todd Marzac, 2024.

"Analytical Models for Solid & Litz Wire AC Winding Loss in Toroidal Inductors", IEEE Transactions on Transportation Electrification, Todd J Marzec, Brandon M Grainger, Ravisekhar Raju, Paul R Ohodnicki, 2024.

"All-Around Electromagnetic Wave Absorber Based on Ni–Zn Ferrite, ACS Applied Materials & Interfaces, Dipika Mandal, Bishal Bhandari, Suraj V Mullurkara, Paul R Ohodnicki, 2024.

"Crystallization, Corrosion, and Magnetic Properties of Soft Magnetic Nanocomposite Co75.4Fe2.3Mn2.3Si2Nb4B14 Alloy for Elevated Temperature Operation", JOM, Yuankang Wang, Alex Leary, John Baltrus, Paul Ohodnicki, 2024.

"Analytical methods for determining high frequency winding loss for toroidal inductors", IEEE Electric Ship Technologies Symposium (ESTS), pages 91–98, Todd J Marzec, Ravisekhar Raju, Brandon Grainger, and Paul R Ohodnicki, 2023.

"Dynamic response of magnetic fluid-cladded MMI fiber optic sensor optimized for fourth self-imaging spectral response", Optical Waveguide and Laser Sensors III, Dolendra Karki, Tulika Khanikar, Suraj Mullurkara, Khurram Naeem, Jun Young Hong, Paul Ohodnicki, 2024.

"Trade Study for Rare-Earth-Free Interior Permanent Magnet Synchronous Machine Using MnBi Permanent Magnets", IEEE Transactions on Industry Applications, Ryan Brody, Paul Ohodnicki, Mohendro Ghosh, Cuauhtemoc Macias, Andrew Sherman, Ahmed Talaat, Jun Cui, Brandon Grainger, 2024.

"Spatially Tuned Properties in a Bulk Fe–Co Soft Magnetic Alloy via Transverse Induction Annealing and Feasibility Study for Motor Applications", Advanced Engineering Materials, Tyler W Paplham, David W Greve, Mohendro K Ghosh, Lauren Wewer, Paul R Ohodnicki, 2024.

"Binder jet 3D printing of Mn–Zn ferrite soft magnet toroidal cores", Applied Materials Today, Chuyuan Zheng, Bishal Bhandari, Suraj Venkateshwaran Mullurkara, Dipika Mandal, Chris Bracken, Alex Pierce, Paul R Ohodnicki, 2024.

"FeNI-based nanocomposite soft magnetic alloy magnetic and mechanical property tailoring through flash annealing", IEEE, Lauren Wewer, Kevin Byerly, Samuel Kernion, Paul Ohodnicki, 2023.

"Corrosion Behavior of Fe81Cr19, Fe49Co49V2, and Co72Fe4Mn4Nb4Si2B14 Alloys in Simulated Venusian Environment", JOM, Yuankang Wang, Ronald D Noebe, Alex Leary, Paul Ohodnicki, 2023.

"Experimental and Theoretical Investigation of Cation Site Occupation and Magnetic Ordering in CoFe2O4", IEEE Transactions on Magnetics, Suraj Mullurkara, Ying Fang, KM Taddei, G Wang, P Ohodnicki, 2023.

"Magnetic Anisotropy and Stress-Dependent Epoxy Wetting in FeNi-Based Metal Amorphous Nanocomposites", IEEE Transactions on Magnetics, J Egbu, A Leary, K Byerly, S Simizu, E Thiesen, P Ohodnicki, M McHenry, 2023.

"A machine learning based computational approach for prediction of cation distribution in spinel crystal", The Journal of Chemical Physics, Ying Fang, Paul R Ohodnicki, Guofeng Wang, 2023.

"Spatially tuned microstructure and properties in soft magnetic nanocrystalline alloy via transverse-oriented induction heating", Journal of Materials Research, Tyler W Paplham, Yuankang Wang, David W Greve, Paul R Ohodnicki, 2023.

"Understanding magnetic interactions and reversal mechanisms in a spinodally decomposed cobalt ferrite using first order reversal curves", AIP Advances, Suraj V Mullurkara, Ramon Egli, BC Dodrill, Susheng Tan, PR Ohodnicki, 2023.

“Relation between cation distribution and chemical bonds in spinel NiFe2O4”, Materials Today Communications, Ying Fang, Siming Zhang, Paul R Ohodnicki, Guofeng Wang, 2022.

Ryan Brody+, Paul Ohodnicki, Mohendro Ghosh, Ahmed Talaat, Cuauhtemoc Macias+, Jun Cui, Nicholas Krywopusk and Brandon M. Grainger, “Trade Study for Rare-Earth-Free Interior Permanent Magnet Synchronous Machine using MnBi Permanent Magnets,” 2022 IEEE Energy Conversion Congress and Exposition (ECCE), Detroit, Michigan, 2022 (Accepted)

Zachary T. Smith+, Michael L. McIntyre, Paul Ohodnicki, and Brandon M. Grainger, “A Parameter Estimator for Inductance within a Dual Active Bridge Converter,” 2022 IEEE Energy Conversion Congress and Exposition (ECCE), Detroit, Michigan, 2022 (Accepted)

“Analysis of surface roughness and oxidation of FeNi-based metal amphorous nanocomposite alloys”, Journal of Alloys and Compounds, J Egbu, PR Ohodnicki Jr, JP Baltrus, A Talaat, RF Wright, ME McHenry, 2022.

“Nanostructured refinement and phase formation of flash annealed FeNi-based soft magnetic alloys”, Materials Research Bulletin 152, 111839, A Talaat, J Egbu, C Phatak, ME McHenry, PR Ohodnicki, 2022.

“Radio-Frequency Rapid Thermal Processing Enabling Spatial Phase Transformation and Nanocrystallization of Soft Magnetic Amorphous Alloys”, Advanced Engineering Materials, A Talaat, A Talaat, DW Greve, S Tan, T Paplham, K Byerly, ME McHenry, PR Ohodnicki Jr, 2022.

“Magnetic Characterization of self-assembled nanostructures in cobalt ferrites using first-order reversal curve (FORC) analysis”, AIP Advances 12 (3), 035031, MV Suraj, A Talaat, BC Dodrill, Y Wang, JK Lee, PR Ohodnicki Jr.

“Laser patterning assisted devitrification and domain engineering of amorphous and nanocrystalline alloys”, AIP Advances 12 (3), 035313. A Talaat, DW Greve, A Leary, Y Liu, J Wiezorek, PR Ohodnicki Jr.

“Review on soft magnetic metal and inorganic oxide nanocomposites for power applications”, Journal of Alloys and Compounds, A. Talaat, M.V. Suraj, K. Byerly, A. Wang, Y. Wang, J.K. Lee, P.R. Ohodnicki Jr, 2021

“Medium / High Power and Medium Frequency Magnetics: Materials / Manufacturing, Characterization, and Modeling / Design Methods”, APEC 2020 Tutorial, Prof. Paul Ohodnicki.

“Electromagnetic Assisted Thermal Processing of Amorphous and Nanocrystalline Soft Magnetic Alloys: Fundamentals and Advances” , Journal of Alloys and Compounds , A. Talaat, D. Greve, M.V. Suraj, P. Ohodnicki, 2020.

“Nanostructure and Compositional Segregation of Soft Magnetic FeNi-Based Nanocomposites with Multiple Nanocrystalline Phases” , Journal of Materials Research, P. Ohodnicki, E.J. Kautz, A. Devaraj, Y. Yu, N. Aronhime, Y. Krimer, M. E. McHenry, A. Leary, 2020.

“Special Issue: Performance and Reliability of Wide Bandgap Semiconductor and Nano Device Based Circuits for Energy Systems” , Energies, January 2021, William Stanchina and Brandon Grainger.

“Self-Synchronizing Current Control for Three-Phase Inverter in the Presence of Unknown Grid Parameters” , Proc. 2020 IEEE Applied Power Electronics Conference & Exposition (APEC), New Orleans, Louisiana, March 2020, Joseph Latham, Moath Alqatamin, Zachary Smith, Brandon M. Grainger and Michael McIntyre.

“Evaluation of Point of Load Converters for Space Computational Loads” ,Proc. 2020 IEEE Aerospace Conference, Big Sky, MT, 2020, Thomas Cook, Aiden Phillips, Christopher Siak, Alan George and Brandon M. Grainger.

“Power Regulation of Solid-State Transformer Based Quad-Active Bridge DC-DC Converter using Adaptive Linear Quadratic Regulator and Nonlinear Model Predictive Control” , 2020 IEEE Energy Conversion Congress and Exposition (ECCE), Detroit, Michigan, USA, 2020, Mohammed Hatatah and Brandon Grainger.

“Control of Boost Converter Module for Open-End Winding Permanent Magnet Motor Based Dual Inverter Drive” , 2020 IEEE Energy Conversion Congress and Exposition (ECCE), Detroit, Michigan, USA, 2020 , Ryan Brody and Brandon Grainger.

“Preserving Converter Lifetime by Active Thermal Boundary Control” , 2020 IEEE Energy Conversion Congress and Exposition (ECCE), Detroit, Michigan, USA, 2020 , Patrick Lewis and Brandon Grainger.

“Direct Torque Model Predictive Control of Five-Phase Permanent Magnet Synchronous Motors” , IEEE Transactions on Power Electronics, Bojian Cao, Brandon M. Grainger, Xin Wang, Yu Zhou,Gregory F. Reed and Zhi-Hong Mao.

“Current Control of a Three-Phase, Grid-Connected Inverter in the Presence of Unknown Grid Parameters without Phase Lock Loops” , IEEE Transactions on Emerging and Selected Topics in Power Electronics , Moath Alqatamin, Joseph Latham, Zachary Smith, Brandon M. Grainger and Michael McIntyre.